How to use

Step 1

Choose and purchase vinyl. There are many colors and patterns to choose from.

Reverse your design. It is very important to remember is to reverse the image, so that it does not come out backwards on your final product. Choose designs and engrave it with the cut plotter.

Step 2

"Weed" your design with sharp tools like a pointed needle and exacto knife. Weeding is when you remove small parts of your image's negative space. Use the sharp points of your tools to pick up small areas and peel them off more easily.

Step 3

Heat a clothes iron to the temperature to 145-160℃.And your iron over it to get out all wrinkles and moisture.

Lay your design onto the fabric, this time shiny side up. It should be positioned how you want it to look in your final product.

Press the iron on your design and press the machine on your design for 12-15 seconds or the time according to the product instructions.

Step 4

After pressing, let it sit for more than 10 seconds to let the hot melt adhesive on the bottom of the product adhere to the fabric.Peel off the carrier sheet. Read the instructions that came with vinyl, our vinyl are warm peeling or cold peeling.